Fast service. This is a well made O2 (oxygen) sensor socket. I purchased this to remove and install the three sensors on my 1999 Lexus RX300...worked perfectly.
Good quality socket, but may not reach sensor if heat shield is fitted
This is a well-made, heavy socket designed to remove/install oxygen sensors on most cars. I used the socket to replace the post-catalytic converter sensor located underneath my car. This sensor was fairly easy to access and the Lisle socket worked as designed, removing the old sensor quite easily and tightening up the new one without a hitch. Unfortunately, the second sensor, located before the converter, has a heat shield around it that the socket is too thick-walled to pass through, so I will have to try and remove the heat shield before I can use this socket on the second sensor.
Bottome line: This is a well made socket that works, but if your vehicle uses a heat shield around the oxygen sensor you may need to remove the shield before you can use this socket.
Proper fit, but too big
I was able to get to my pre-cat O2 sensor easily enough with this and a ratchet extension, pulled that sensor out easily enough. But the socket was way too big to get to my post-cat sensor without removing the heat shield housing underneath which is why I bought the socket in the first place. Was able to get to that one with an adjustable wrench and probably could have gotten to the other sensor as well and not bought this at all.
product is good but don't need
The product shipped quickly and in good shape.
However, I found out I don't need it even I replaced two o2 sensors on my 99 Camry.
Good product
Did not work well on 98 Lincoln Mark VIII exhaust system due entirely to angles and clearances. Would probably work well on other cars, however.
